Off the floor · Studs & Stud Bolts · posted 7mo ago
1-1/2-6 UNC-2A x 266 MM Double End Stud
ASTM A320. Machined to the customer's drawing in our Houston shop.
Job details
PartDouble End Stud
Thread1-1/2-6 UNC-2A
Length266 MM
MaterialASTM A320
Grade pageA320 L7
Product familyStuds & Rods
Made inHouston, Texas · ISO 9001 certified
Double End Stud is engineered for strength, durability, and reliable performance 1-1/2-6 UNC-2A x 266 MM. Double End Stud ASTM A320 L7 Steel Built to spec. Strength and precision you can trust.
Studs are cut from certified bar, threaded by rolling or single-point cutting to the class called out, and chamfered and marked before they leave. Double-end and tap-end patterns, special lengths and drilled or coated variants are all made to the drawing.
About the material: The low-temperature twin of B7 — same 4140 Cr-Mo steel, same 125 ksi strength, but impact tested at −150 °F for cryogenic and cold-climate service. Read the A320 L7 data page →
More studs & stud bolts off the floor
2-1/4" Studbolts & Heavy Hex Nuts
ASTM A193 B7 / A194 2H
3/4"-10 UNC-2A x 3/4"-16 UNJF-3A x 4.00" Special Double End Stud
Inconel Alloy 718
5/8"-11 UNC-2A x 5/8"-18 UNJF-3A x 3.69" Special Double End Stud
Alloy 718 (Inconel)
3"-8 UN-2A x 28.375" Double End Stud
ASTM A354 Grade BC
1-3/4"-8 UN-2A x 9.66" Stud
ASTM A193 Grade B7M
5/8"-11 UNC-2A x 4.12" (+/-.02") Stud
Monel K500
Have a drawing like this one?
Send it over — most parts ship within days, and the hot-shot line runs 24/7 · 832-446-3442