Off the floor · Studs & Stud Bolts
1-3/4"-8 UN-3A x 15.18" Special Double End Blanking Stud
ASTM A193 Grade B16. Machined to the customer's drawing in our Houston shop.
Job details
PartSpecial Double End Blanking Stud
Thread1-3/4"-8 UN-3A
Length15.18"
MaterialASTM A193 Grade B16
Grade pageA193 B16
Product familyStuds & Rods
Made inHouston, Texas · ISO 9001 certified
Special double end blanking stud, 1-3/4"-8 UN-3A x 15.18", machined from ASTM A193 Grade B16 alloy steel. Custom-machined with a grooved shoulder and 1/2" NPT drilled ends per the customer's drawing.
Studs are cut from certified bar, threaded by rolling or single-point cutting to the class called out, and chamfered and marked before they leave. Double-end and tap-end patterns, special lengths and drilled or coated variants are all made to the drawing.
About the material: Vanadium-strengthened Cr-Mo bolting that holds its strength where B7 starts to relax — steam turbines, HP steam flanges and hot valve bonnets. Read the A193 B16 data page →
More studs & stud bolts off the floor
3/4"-10 UNC-3A/2A x 6" Custom Stud
Naval Brass C48500 H02 (ASTM B21)
3/4"-10 UNC-2A x 3/4"-16 UNJF-3A x 4.00" Special Double End Stud
Inconel Alloy 718
5/8"-11 UNC-2A x 5/8"-18 UNJF-3A x 3.69" Special Double End Stud
Alloy 718 (Inconel)
3"-8 UN-2A x 28.375" Double End Stud
ASTM A354 Grade BC
1-3/4"-8 UN-2A x 9.66" Stud
ASTM A193 Grade B7M
5/8"-11 UNC-2A x 4.12" (+/-.02") Stud
Monel K500
Have a drawing like this one?
Send it over — most parts ship within days, and the hot-shot line runs 24/7 · 832-446-3442