ISO 9001 Certified·Domestic Manufacturer — Houston, TX
Hot-shot line open832-446-3442
Innovation FastenersInnovation Fasteners
HomeEmergency / Hot-shot 24/7ContactGet a Quote
Off the floor · Washers · posted 3yr ago

1.500" Flat Washer

ASTM A479 Type 410. Machined to the customer's drawing in our Houston shop.

1.500" Flat Washer in ASTM A479 Type 410 — machined by Innovation Fasteners, Houston
Job details
PartFlat Washer
MaterialASTM A479 Type 410
Grade pageA193 B6
Product familyWashers
Made inHouston, Texas · ISO 9001 certified

1.500" flat washer machined per customer drawing from ASTM A479 Type 410 stainless steel.

Washers and spacers are turned from plate or bar in the same material as the joint, to the inside diameter, outside diameter and thickness on the drawing.

About the material: Hardenable 410 stainless bolting — 110 ksi with corrosion resistance B7 lacks, for valve trim, steam and mildly corrosive service. Read the A193 B6 data page →

More washers off the floor
1-1/4" Helical Split Lock Washer in ASTM A453 Grade 660 Class A — machined by Innovation Fasteners, Houston
1-1/4" Helical Split Lock Washer
ASTM A453 Grade 660 Class A
3.5" ID x 7.25" OD x 1" Flat Washer in 304 Stainless Steel — machined by Innovation Fasteners, Houston
3.5" ID x 7.25" OD x 1" Flat Washer
304 Stainless Steel
3" OD x .25" Countersunk Washer in ASTM A193 B7 — machined by Innovation Fasteners, Houston
3" OD x .25" Countersunk Washer
ASTM A193 B7
1.750" OD x .906" ID x .125" Washers, Batch of 200 in 410 Stainless Steel — machined by Innovation Fasteners, Houston
1.750" OD x .906" ID x .125" Washers, Batch of 200
410 Stainless Steel
.590" / .53" ID x 1.12" OD x .28" Two-Piece Washer Set in Nitronic 60 per G-64 — machined by Innovation Fasteners, Houston
.590" / .53" ID x 1.12" OD x .28" Two-Piece Washer Set
Nitronic 60 per G-64

Have a drawing like this one?

Send it over — most parts ship within days, and the hot-shot line runs 24/7 · 832-446-3442
Get a Quote