Off the floor · Studs & Stud Bolts
3/4"-10 UNC-2A x 6-1/4" Guide Studs
ASME SA-479 321 stainless steel. Machined to the customer's drawing in our Houston shop.
Job details
PartGuide Studs
Thread3/4"-10 UNC-2A
Length6-1/4"
MaterialASME SA-479 321 stainless steel
Grade page321 Stainless
Product familyStuds & Rods
Made inHouston, Texas · ISO 9001 certified
3/4"-10 UNC-2A x 6-1/4" guide studs made per drawing from ASME SA-479 Type 321 stainless steel.
Studs are cut from certified bar, threaded by rolling or single-point cutting to the class called out, and chamfered and marked before they leave. Double-end and tap-end patterns, special lengths and drilled or coated variants are all made to the drawing.
About the material: 18-8 stabilized with titanium so it can be welded and run hot without sensitizing — the stainless for exhaust, expansion joints and furnace hardware. Read the 321 Stainless data page →
More studs & stud bolts off the floor
2-1/4" Studbolts & Heavy Hex Nuts
ASTM A193 B7 / A194 2H
3/4"-10 UNC-2A x 3/4"-16 UNJF-3A x 4.00" Special Double End Stud
Inconel Alloy 718
5/8"-11 UNC-2A x 5/8"-18 UNJF-3A x 3.69" Special Double End Stud
Alloy 718 (Inconel)
3"-8 UN-2A x 28.375" Double End Stud
ASTM A354 Grade BC
1-3/4"-8 UN-2A x 9.66" Stud
ASTM A193 Grade B7M
5/8"-11 UNC-2A x 4.12" (+/-.02") Stud
Monel K500
Have a drawing like this one?
Send it over — most parts ship within days, and the hot-shot line runs 24/7 · 832-446-3442