Off the floor · Studs & Stud Bolts
3/4"-10 UNC-2A x 7-3/4" Double End Stud
Monel 400 (QQ-N-281D Class A). Machined to the customer's drawing in our Houston shop.
1 / 2
Job details
PartDouble End Stud
Thread3/4"-10 UNC-2A
Length7-3/4"
MaterialMonel 400 (QQ-N-281D Class A)
Grade pageMonel 400
Product familyStuds & Rods
Made inHouston, Texas · ISO 9001 certified
3/4"-10 UNC-2A x 7-3/4" double end stud made to drawing from Monel 400 per QQ-N-281D Class A.
Studs are cut from certified bar, threaded by rolling or single-point cutting to the class called out, and chamfered and marked before they leave. Double-end and tap-end patterns, special lengths and drilled or coated variants are all made to the drawing.
About the material: The nickel-copper alloy that shrugs off seawater, brine and hydrofluoric acid — the classic marine and chemical fastener material, non-sparking and tough to cryogenic temperatures. Read the Monel 400 data page →
More studs & stud bolts off the floor
2-1/4" Studbolts & Heavy Hex Nuts
ASTM A193 B7 / A194 2H
3/4"-10 UNC-2A x 3/4"-16 UNJF-3A x 4.00" Special Double End Stud
Inconel Alloy 718
5/8"-11 UNC-2A x 5/8"-18 UNJF-3A x 3.69" Special Double End Stud
Alloy 718 (Inconel)
3"-8 UN-2A x 28.375" Double End Stud
ASTM A354 Grade BC
1-3/4"-8 UN-2A x 9.66" Stud
ASTM A193 Grade B7M
5/8"-11 UNC-2A x 4.12" (+/-.02") Stud
Monel K500
Have a drawing like this one?
Send it over — most parts ship within days, and the hot-shot line runs 24/7 · 832-446-3442