Off the floor · Studs & Stud Bolts
3/4"-10 UNC-3A x 4-1/2" Double End Studs with Machined Radius
ASTM A193 B8M Class 1, meeting 316L. Machined to the customer's drawing in our Houston shop.
Job details
PartDouble End Studs with Machined Radius
Thread3/4"-10 UNC-3A
Length4-1/2"
MaterialASTM A193 B8M Class 1, meeting 316L
Grade pageA193 B8M Class 1
Product familyStuds & Rods
Made inHouston, Texas · ISO 9001 certified
3/4" UNC-3A x 4-1/2" double end studs with a machined radius, made from ASTM A193 B8M Class 1 material that also meets 316L.
Studs are cut from certified bar, threaded by rolling or single-point cutting to the class called out, and chamfered and marked before they leave. Double-end and tap-end patterns, special lengths and drilled or coated variants are all made to the drawing.
About the material: 316 stainless bolting with molybdenum for chloride and pitting resistance — offshore, marine, chemical and coastal plant fasteners. Read the A193 B8M Class 1 data page →
More studs & stud bolts off the floor
2-1/4" Studbolts & Heavy Hex Nuts
ASTM A193 B7 / A194 2H
3/4"-10 UNC-2A x 3/4"-16 UNJF-3A x 4.00" Special Double End Stud
Inconel Alloy 718
5/8"-11 UNC-2A x 5/8"-18 UNJF-3A x 3.69" Special Double End Stud
Alloy 718 (Inconel)
3"-8 UN-2A x 28.375" Double End Stud
ASTM A354 Grade BC
1-3/4"-8 UN-2A x 9.66" Stud
ASTM A193 Grade B7M
5/8"-11 UNC-2A x 4.12" (+/-.02") Stud
Monel K500
Have a drawing like this one?
Send it over — most parts ship within days, and the hot-shot line runs 24/7 · 832-446-3442