Off the floor · Machined Components
1-1/2"-12 UNF-2A x .870" DCV Plug
Nitronic 50. Machined to the customer's drawing in our Houston shop.
1 / 2
Job details
PartDCV Plug
Thread1-1/2"-12 UNF-2A
Length.870"
MaterialNitronic 50
Grade pageNitronic 50
Product familyMachined Components
Made inHouston, Texas · ISO 9001 certified
1-1/2"-12 UNF-2A x .870" DCV plug machined from Nitronic 50 with 105 ksi minimum yield strength. Held to a manufacturing tolerance of +/- .005".
Machined components are built to print from certified bar: turned, milled, drilled and tapped, then inspected against the drawing before shipment. Pins, sleeves, plugs, fittings and adapters are typical of this work.
About the material: Nearly twice the yield strength of 316 with better corrosion resistance, non-magnetic even after cold work — the marine and sour-service austenitic for shafts, valves and high-strength bolting. Read the Nitronic 50 data page →
More machined components off the floor
1-1/8"-12 UNF-2A x 3" OAL x .875" ID Special Male-to-Male Coupler
ASTM A564 17-4 PH (H900)
1.680" ID x 5.00" OD x 1.50" THK Special Machined Housing
Aluminum 6061-T6511
0.3125"-24 UNF-2A x 1" Solid Dual Seal Plug
Alloy 718
16.00 MM X 38.00 MM Custom Sleeve
ASTM A193 Grade B7
1.621" x 4.28" Pin Guide
ASTM A108 Grade 1018, zinc plated
Hydraulic Stab Integral Connection
Nitronic 50
Have a drawing like this one?
Send it over — most parts ship within days, and the hot-shot line runs 24/7 · 832-446-3442