Off the floor · Machined Components · posted 3yr ago
4.000" OD x 3.310" ID x 6.937" Bore Inserts
4140, heat treated. Machined to the customer's drawing in our Houston shop.
Job details
PartBore Inserts
Length3.310"
Material4140, heat treated
Grade page4140
Product familyMachined Components
Made inHouston, Texas · ISO 9001 certified
Bore inserts at 4.000" OD × 3.310" ID × 6.937" long, OD held to 0.01", machined from heat-treated 4140 for a returning customer.
Machined components are built to print from certified bar: turned, milled, drilled and tapped, then inspected against the drawing before shipment. Pins, sleeves, plugs, fittings and adapters are typical of this work.
About the material: The workhorse Cr-Mo steel behind B7, L7 and Grade 7 — the bar stock for studs, shafts, couplings and any part that needs 100 to 150 ksi and good toughness. Read the 4140 data page →
More machined components off the floor
1-1/8"-12 UNF-2A x 3" OAL x .875" ID Special Male-to-Male Coupler
ASTM A564 17-4 PH (H900)
1.680" ID x 5.00" OD x 1.50" THK Special Machined Housing
Aluminum 6061-T6511
0.3125"-24 UNF-2A x 1" Solid Dual Seal Plug
Alloy 718
16.00 MM X 38.00 MM Custom Sleeve
ASTM A193 Grade B7
1.621" x 4.28" Pin Guide
ASTM A108 Grade 1018, zinc plated
Hydraulic Stab Integral Connection
Nitronic 50
Have a drawing like this one?
Send it over — most parts ship within days, and the hot-shot line runs 24/7 · 832-446-3442