Off the floor · Machined Components · posted 3mo ago
5/8-18 UNF-2A x 1.50" Subsea Plug
Nitronic 50 (ASTM A276). Machined to the customer's drawing in our Houston shop.
Job details
PartSubsea Plug
Thread5/8-18 UNF-2A
Length1.50"
MaterialNitronic 50 (ASTM A276)
Grade pageA193 B8R
Product familyMachined Components
Made inHouston, Texas · ISO 9001 certified
SUBSEA PLUG, 5/8-18 UNF-2A x 1.50”, is precision machined from Nitronic 50 per ASTM A276 for strength and reliability in harsh environments. High-strength austenitic alloy Excellent corrosion resistance Low magnetic permeability.
Machined components are built to print from certified bar: turned, milled, drilled and tapped, then inspected against the drawing before shipment. Pins, sleeves, plugs, fittings and adapters are typical of this work.
About the material: Nitronic 50 bolting — twice the yield strength of 316 with better seawater corrosion resistance and no loss of ductility, non-magnetic even after cold work. Read the A193 B8R data page →
More machined components off the floor
1-1/8"-12 UNF-2A x 3" OAL x .875" ID Special Male-to-Male Coupler
ASTM A564 17-4 PH (H900)
1.680" ID x 5.00" OD x 1.50" THK Special Machined Housing
Aluminum 6061-T6511
0.3125"-24 UNF-2A x 1" Solid Dual Seal Plug
Alloy 718
16.00 MM X 38.00 MM Custom Sleeve
ASTM A193 Grade B7
1.621" x 4.28" Pin Guide
ASTM A108 Grade 1018, zinc plated
Hydraulic Stab Integral Connection
Nitronic 50
Have a drawing like this one?
Send it over — most parts ship within days, and the hot-shot line runs 24/7 · 832-446-3442