Bolting for British Columbia's Lower Mainland.
BC's largest refinery at Burnaby, the Trans Mountain export terminal and LNG on Tilbury Island.
- RefineryParkland (Sunoco LP) Burnaby Refinery, Burnaby — 55,000 barrels/day
- TerminalTrans Mountain Westridge Marine Terminal, Burnaby — up to 630,000 barrels/day of crude exports
- LNGFortisBC Tilbury LNG, Delta — operating since 1971
Listed to describe the area’s industry — not a list of our customers.
What plants in the Lower Mainland order.
Flange and valve bolting for crude, hydrotreating and FCC units — B7 and B7M stud bolts with 2H and 2HM nuts, often PTFE coated, and sour-service grades to NACE MR0175.
Low-temperature bolting that stays tough in cryogenic service — A320 L7 and the A320 stainless grades, Charpy tested to the temperature.
Flange, valve and tank bolting for storage terminals, fractionators and pipelines — B7 stud bolts with 2H nuts, and L7 where lines run cold.
Jobs we’ve made in these grades.
Do you have a location in the Lower Mainland?
No — everything is made and shipped from our shop at 18401 Intercontinental Crossing Dr, Houston, TX 77073, about 2,450 miles from the Lower Mainland by road.
How fast can you get bolting to the Lower Mainland?
We ship from Houston 2–4 days by ground, next-day air, or dedicated transport to Canada. When a unit is down, call 832-446-3442 — answered 24/7 — and we will quote the fastest option on the call. Made-to-order parts are quoted with a lead time.
Do you ship to the Lower Mainland?
Yes. We ship to Canada from Houston 2–4 days by ground, next-day air, or dedicated transport, and quote the delivery time and shipping terms with every order.
What certification comes with the parts?
Every lot ships with an EN 10204 3.1 material test report traceable to the heat. EN 10204 3.2, PMI, Charpy and NACE MR0175 compliance are available on request.
What do refineries in the Lower Mainland usually order?
Flange and valve bolting for crude, hydrotreating and FCC units — B7 and B7M stud bolts with 2H and 2HM nuts, often PTFE coated, and sour-service grades to NACE MR0175.
What do LNG terminals in the Lower Mainland usually order?
Low-temperature bolting that stays tough in cryogenic service — A320 L7 and the A320 stainless grades, Charpy tested to the temperature.
What do terminals & pipelines in the Lower Mainland usually order?
Flange, valve and tank bolting for storage terminals, fractionators and pipelines — B7 stud bolts with 2H nuts, and L7 where lines run cold.