Bolting for Teesside.
Where Norwegian and Central North Sea oil and gas come ashore at Seal Sands, with one of Britain's main platform decommissioning yards, the deep-water Teesport, and a carbon-capture gas power station under construction at Redcar.
- TerminalConocoPhillips Teesside Oil Terminal, Seal Sands — receives Ekofisk-area crude and NGLs through the 354 km Norpipe line since 1975
- Gas plantKellas Midstream CATS gas terminal, Seal Sands — landing point for Central North Sea gas
- OffshoreAble UK Able Seaton Port, Hartlepool — received all four Shell Brent platform topsides for dismantling
- TerminalPD Ports Teesport, Middlesbrough — UK's sixth-largest port, lock-free access to the North Sea
- PowerNZT Power (bp / Equinor) Net Zero Teesside Power (under construction), Redcar — up to 742 MW with carbon capture, start-up expected 2028
Listed to describe the area’s industry — not a list of our customers.
What plants in Teesside order.
Bolting for gas processing, NGL fractionation and treating units — B7 stud bolts with 2H nuts, B7M and 2HM for sour gas, and L7 on the cold side.
Turbine, boiler and heat-exchanger bolting that holds its load at temperature — B16, A453 660 and 422 stainless studs made to OEM drawings.
Flange, valve and tank bolting for storage terminals, fractionators and pipelines — B7 stud bolts with 2H nuts, and L7 where lines run cold.
Bolting for platform modules, subsea equipment and topsides piping built and serviced onshore — B7 and L7 stud bolts with 2H nuts, and super duplex and Inconel 625 where seawater attacks carbon steel.
Jobs we’ve made in these grades.
Do you have a location in Teesside?
No — everything is made and shipped from our shop at 18401 Intercontinental Crossing Dr, Houston, TX 77073, about 4,700 miles from Teesside in a straight line.
How fast can you get bolting to Teesside?
We ship to Teesside, United Kingdom by international air or ocean freight from Houston, with the delivery time and shipping terms quoted on every order. When a unit is down, call +1 832-446-3442 — answered 24/7, Houston time — and we will quote the fastest air option on the call. Made-to-order parts are quoted with a lead time.
Do you ship to United Kingdom?
Yes. We ship from Houston by international air or ocean freight from Houston, with the delivery time and shipping terms quoted on every order. Parts are made and certified in Houston before they ship.
What certification comes with the parts?
Every lot ships with an EN 10204 3.1 material test report traceable to the heat. EN 10204 3.2, PMI, Charpy and NACE MR0175 compliance are available on request.
What do gas plants in Teesside usually order?
Bolting for gas processing, NGL fractionation and treating units — B7 stud bolts with 2H nuts, B7M and 2HM for sour gas, and L7 on the cold side.
What do power stations in Teesside usually order?
Turbine, boiler and heat-exchanger bolting that holds its load at temperature — B16, A453 660 and 422 stainless studs made to OEM drawings.
What do terminals & pipelines in Teesside usually order?
Flange, valve and tank bolting for storage terminals, fractionators and pipelines — B7 stud bolts with 2H nuts, and L7 where lines run cold.
What do offshore yards & supply bases in Teesside usually order?
Bolting for platform modules, subsea equipment and topsides piping built and serviced onshore — B7 and L7 stud bolts with 2H nuts, and super duplex and Inconel 625 where seawater attacks carbon steel.
Sources: conocophillips.com · pdports.co.uk · kellasmidstream.com · ableuk.com · netzeroteesside.co.uk