Bolting for Tampico, Altamira & Tuxpan.
Pemex's Ciudad Madero refinery and marine terminal, the petrochemical port of Altamira with Mexico's first LNG export unit offshore, and the oil-fired power and fuel terminal at Tuxpan.
- RefineryPemex Francisco I. Madero Refinery, Ciudad Madero — 190,000 barrels/day atmospheric distillation
- TerminalPemex Terminal Marítima Ciudad Madero, Ciudad Madero
- LNGNew Fortress Energy Altamira Fast LNG 1, Offshore Altamira — 1.4 million t/year nameplate
- ChemicalAlpek / LyondellBasell (Indelpro) Indelpro polypropylene plant, Altamira — about 640,000 t/year installed capacity
- PowerCFE Adolfo López Mateos Power Station, Tuxpan
- TerminalPemex Terminal Marítima Tuxpan, Tuxpan
Listed to describe the area’s industry — not a list of our customers.
What plants in Tampico order.
Flange and valve bolting for crude, hydrotreating and FCC units — B7 and B7M stud bolts with 2H and 2HM nuts, often PTFE coated, and sour-service grades to NACE MR0175.
Corrosion-resistant bolting for process lines, reactors and exchangers — 316 stainless (B8M), duplex and nickel alloys where chlorides or acids attack carbon steel.
Low-temperature bolting that stays tough in cryogenic service — A320 L7 and the A320 stainless grades, Charpy tested to the temperature.
Turbine, boiler and heat-exchanger bolting that holds its load at temperature — B16, A453 660 and 422 stainless studs made to OEM drawings.
Flange, valve and tank bolting for storage terminals, fractionators and pipelines — B7 stud bolts with 2H nuts, and L7 where lines run cold.
Jobs we’ve made in these grades.
Do you have a location in Tampico?
No — everything is made and shipped from our shop at 18401 Intercontinental Crossing Dr, Houston, TX 77073, about 650 miles from Tampico by road.
How fast can you get bolting to Tampico?
We ship to Tampico, Mexico by international air or ocean freight from Houston, with the delivery time and shipping terms quoted on every order. When a unit is down, call +1 832-446-3442 — answered 24/7, Houston time — and we will quote the fastest air option on the call. Made-to-order parts are quoted with a lead time.
Do you ship to Mexico?
Yes. We ship from Houston by international air or ocean freight from Houston, with the delivery time and shipping terms quoted on every order. Parts are made and certified in Houston before they ship.
What certification comes with the parts?
Every lot ships with an EN 10204 3.1 material test report traceable to the heat. EN 10204 3.2, PMI, Charpy and NACE MR0175 compliance are available on request.
What do refineries in Tampico usually order?
Flange and valve bolting for crude, hydrotreating and FCC units — B7 and B7M stud bolts with 2H and 2HM nuts, often PTFE coated, and sour-service grades to NACE MR0175.
What do chemical plants in Tampico usually order?
Corrosion-resistant bolting for process lines, reactors and exchangers — 316 stainless (B8M), duplex and nickel alloys where chlorides or acids attack carbon steel.
What do LNG terminals in Tampico usually order?
Low-temperature bolting that stays tough in cryogenic service — A320 L7 and the A320 stainless grades, Charpy tested to the temperature.
What do power stations in Tampico usually order?
Turbine, boiler and heat-exchanger bolting that holds its load at temperature — B16, A453 660 and 422 stainless studs made to OEM drawings.
What do terminals & pipelines in Tampico usually order?
Flange, valve and tank bolting for storage terminals, fractionators and pipelines — B7 stud bolts with 2H nuts, and L7 where lines run cold.
Sources: pemex.com · pgjonline.com · alpek.com · gem.wiki